| Model |
HLHTM-100 |
| *Max. Unwind web width |
1000 mm |
| *Max. Unwind Reel dia |
800 mm |
| *Max. Rewind Reel dia |
800 mm |
| Hologram Unwind Reels |
1 No (can handle multiple holography reels of 76mm ID).
(It can also handle laminating strip width 20mm to 50mm.)
|
| *Hologram Unwind Reels Core Dia |
76mm |
| *Polyester waste Rewind Arm |
1 No |
| Min. film thickness |
1 No |
| *Silicon Pressure Roll |
1 No |
| *Heating Roll |
76 mm/3" |
| *Heating load |
6 Kw |
| Unwind Air Shaft Inner Dia |
76 mm (adapter for 152mm 2 adaptor also provided chargeable) |
Rewind Air Shaft Inner Dia
Max. Speed (Mtrs/Min.)
|
76 mm (adapter for 152mm 2 adaptor also provided chargeable)
70M/Min(Depend on material)
|
| Ac Drive (3-phase) |
3 Hp /2.2kW (2 no’s) |
| *Motor AC (Geared motor) |
3 Hp /2.2kW (2 no’s) |
| *Unwind Tension |
Manually by using Pneumatic Brake. (Make MMT) |
| *Rewind Tension |
Manually by using Pneumatic Clutch. (Make MMT) |
| *Free Margin Control |
By Using Electronics Edge Guiding / Line Guiding System. (Make E+L) |
| *Length Counting System |
Digital Pre-set Counter Auto-Cut Length Counting system. |
| *Material Loading System |
By using Air Expandable Shafts. |
| *Material Unloading System |
By using Air Expandable Shafts. |
| *Air Required |
8-10 Bars |
| *Power Requirements |
11 kW 415V Ac /3 Phase (Max) |
